Signed Marcont Structures
Discover the equipment and accessories for tall masts
STANDARD STRAIGHT SLEEPERS
• Single flange straight crossbars
400 or 1100 right
| Reference | L (m) | Section | Q.flanges | Total weight (Kg) | SCX (m²) |
|---|---|---|---|---|---|
| TR 400 SB | 0,4 | U 100 | 1 | 4 | 0,05 |
| TR 1100 SB | 1,1 | U 100 | 1 | 10 | 0,15 |
| TR 1100 DB | 1,1 | U 140 | 2 | 14 | 0,21 |
| TR 1500 DB | 1,5 | U 140 | 2 | 21 | 0,29 |
| TR 2000 DB | 2,0 | U 140 | 2 | 23 | 0,41 |
The crossbars can be mounted on any type of support, from functional poles to large lighting poles. They are light, easy to install, and the diversity of the range makes it possible to create any type of configuration.
• Double flange straight crossbar
1100, 1500 or 2000 straight
• Crossbar for top mounting
400, 1100 or 1500
| Reference | L (m) | Section | Total weight (Kg) | SCX (m²) |
|---|---|---|---|---|
| TR Top 400 | 0,4 | U 140 | 14 | 0.03 |
| TR Top 1100 | 1,1 | U 140 | 25 | 0.05 |
| TR Top 1500 | 1,5 | U 140 | 32 | 0.06 |
The straight crossbars are mounted on masts with a head Ø varying from :
60 to 205 mm (crossbar 1 flange)
76 to 205 mm (2-flange crossbar)
ADVANCED STRAIGHT SLEEPERS
• Crossbar 2770 right
| Reference | L (m) | Section | Total weight (Kg) | SCX (m²) |
|---|---|---|---|---|
| TR DA 2760 | 2,76 | U 80 | 41 | 0,38 |
BROKEN SLEEPERS
• Broken crossbar 2714
| Reference | L (m) | Section | Rebound length (m) |
|---|---|---|---|
| TR KC 2714 | 2,714 | U 140 | 0,75 |
CURVED SLEEPERS
• Curved crossbar 1100
• Crossbeam 1840 curved
| Reference | L (m) | Section | Total weight (Kg) | SCX (m²) |
|---|---|---|---|---|
| TR 1100 2/4 | 1,1 | U 80 | 20 | 0,15 |
| TR 1840 2/4 | 1,84 | U 80 | 26 | 0,25 |
| TR 1840 3/6 | 1,84 | U 80 | 30 | 0,25 |
Curved crossbeams of equivalent capacity to straight crossbeams can be offered to improve the aesthetics of the masthead. They are lighter and offer less wind resistance.
CROSSBEAMS
• 3 Arms – Crosspiece S500 3 arms
• 4 Arms – Crosspiece S500 4 arms
| Reference | L (m) | Section | Rebound length (m) |
|---|---|---|---|
| TR Croix 500 (3 bras) | 0,5 | 26 | 0,02 |
| TR Croix 500 (4 bras) | 0,5 | 30 | 0,03 |
for top masts 60,76,89 and 101
FIXED SQUARE CROSSPIECES
• Square crossbar – top 500 or 1200 mm
| Reference | L (m) | Section | Rebound length (m) |
|---|---|---|---|
| TR Croix 500 (3 bras) | 0,5 | 26 | 0,02 |
| TR Croix 500 (4 bras) | 0,5 | 30 | 0,03 |
for top masts 60,76,89 and 101
A reinforced fixed crown of 4 m diameter has been developed to support a large number of projectors (up to 30 mounted and suspended projectors), or very large projectors. This crown can only be mounted on high masts.
CIRCULAR SLEEPERS
• Circular Crosspiece – 100, 1500 or 2000 mm
| Reference | L (m) | Section | Rebound length (m) |
|---|---|---|---|
| TR Circulaire 1000 | 1 | 62 | 0,11 |
| TR Circulaire 1500 | 1,5 | 85 | 0,18 |
| TR Circulaire 2000 | 2 | 136 | 0,30 |
for top masts 60,76,89,101 and 106
The fixed crowns can be mounted on most masts (head Ø between 89 and 258 mm), from functional masts to large lighting masts, for 360° lighting.
PLATFORM
Large steel masts equipment
For high masts with a number of projectors ranging from 4 to 24, it is necessary to have a platform for the maintenance of the projectors. This platform is attached to the back of the mast independently of the crossbeams by means of clamps.
MAINTENANCE GATEWAY
Large steel masts equipment
For high masts with a number of projectors ranging from 4 to 24, a platform is required for the maintenance of the projectors. This platform is fixed independently of the crossbars, at the rear of the mast, by means of clamps
AERIAL BUCKET
Large steel masts equipment
For high masts with a number of projectors ranging from 4 to 24, it is necessary to have a platform for the maintenance of the projectors. This platform is attached to the back of the mast independently of the crossbeams by means of clamps.
ACCESS
The masts can be equipped with an access system to carry out the maintenance of the projectors. This system is composed of a rung and a life line (cable and its fall arrestor).
SCALES
26 mm wide anti-slip rungs, in accordance with the NF EN ISO 14 1424 standard Staggered installation every 300 mm from a height of 3 m (anti-vandalism).
RESTING LEVEL
The rest bearing is mechanically fixed by screws or clamps on the mast at maximum every 6 m. It consists of two folding steps that rest on the mast to allow the operator to pass.
FALL PREVENTION SYSTEM
(according to EN 353-1)
• High anchorage point of the fall arrest system welded to the mast in compliance with the NF EN 795 standard.
• Stainless steel cable Ø 8 mm with thimbled loop and CE marked carabiner.
• Deflection limiter placed every 10 m maximum to keep the cable at a distance and avoid it slamming on the mast.
• Cable attached to the low anchor point welded to the mast with a tensioner and a compensation spring.
• Optional fall arrest harness with energy dissipator.
LADDER SUPPORT
Plates fixed on the low anchor point of the lifeline allowing the installation of a ladder on the mast and the access to the first rungs.
PROTECTION
PROTECTION IN TUBE Ø 60
Options :
– Fixations on plates
– Powder coated paint
